Get Amprobe ACDC-54NAV 1000A AC/DC Navigator Clamp Meter with Temperature with lowest price. high quality Product and top trusted online store in the USA, you are coming to the right place. It’s a excellent Product and we are absolutely recommend it!
Description :
The Amprobe ACDC-54NAV digital clamp meter is true RMS (root mean square) sensing. It has a clamp that measures alternating current (AC) to 1, 000 amp. The meter comes with detachable test leads that measure direct current (DC) to 1, 000 amp. The clamp has two jaws that can close around an electrical conductor up to 1. 45" (37 mm) in diameter to measure current without touching or interrupting the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The meter has a joy-stick style controller that allows one-handed navigation and selection of display and features. It has a liquid crystal display (LCD) that shows readings both in digits and on a bar graph. The LCD is backlit for visibility in low light. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The inrush reading displays measurement of entire motor inrush period at startup. A low pass filter helps improve accuracy of voltage and frequency measurements on adjustable-speed motor drives and equipment with background electrical noise. Power factor and active power readings provide data on the power efficiency of an electrical system. The meter measures total harmonic distortion (THD) and individual harmonics, which can degrade the quality of the power being supplied by the system. The peak + or - function records peak positive or negative values for AC current and AC voltage. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 15 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter has an impact- and wear-resistant molded rubber body that can withstand drops up to 4 feet. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and automatically selects select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 10, 000-count resolution, meaning it can display up to 9.Features :
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1, 000V and category IV installations up to 600V.
- Digital clamp meter measures alternating current (AC) and direct current (DC) to 1, 000 amp, AC voltage and DC voltage to 1.
- True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform.
- Clamp with 1. 45" (37 mm) jaw opening measures current without touching or interrupting the circuit.
No comments:
Post a Comment